
–59–
Keypad Functions
The keypad, if used, allows the user to silence alarm and trouble sounders and
perform other system functions, such as bypassing zones, and display zone
descriptors. Zone and system conditions (alarm, trouble, bypass) are displayed
in the Display Window. The system is in the "System Normal" condition when
all zones are intact. If NOT, faulted zones will be displayed in numerical order.
System Commands
The following is a brief list of system commands. For detailed information
concerning system functions, refer to the User's Manual.
SUMMARY OF SYSTEM COMMANDS
Silencing Sounders Code +OFF [1] or press Silence/Reset button
Resetting Smoke
Detectors and
Code +OFF [1] or press Silence/Reset button
Twice
Clearing Alarm
Memory
Bypassing Zones Code +BYPASS [6] + Zone number(s)
Un-bypassing Zone
Types 9, 16, 17, 18, 19
and System Zones 6
and 10–13
Code + Bypass + [6] + Zone Number(s)
Un-bypassing Other
Zones
Code +OFF [1]
Fire Walk Test Mode Master Code + # + 68 (Code + OFF to exit)
Fire Drill Mode Master or User #2 Code + # + 69 (Code +
OFF to exit)
Emergency Keys
There are three emergency key pairs or (on some keypads) lettered keys that,
if programmed, can be used to manually initiate alarms and send a report to
the central station.
Each can be individually programmed for 24-hour Silent, Audible, Auxiliary
or Fire alarm responses. The emergency function is activated when both keys
of the appropriate key pair are pressed at the same time, or the appropriate
lettered key is pressed for at least 2 seconds.
The emergency functions are identified by the system as follows:
Keys Displayed as Zone
[1] & [*], or [A] 95
[*] & [#], or [B] 7
[3] & [#], or [C] 96
Notes:
• Key [D], if present, is not active here.
These keys are intended to be used only
when the 5110XM is installed as a
stand-alone control.
Comentarios a estos manuales