Wheelock MT4-12-LS Guía para resolver problemas descargar pdf (Pagina 45)

–45–

This will be sent when the supervisory condition is restored.

Press *60 TROUBLE REPORT CODE |

This will be sent if a zone goes into trouble.

Press *61 BYPASS REPORT CODE |

This will be sent when a zone is manually bypassed.

Press *62 AC LOSS REPORT CODE |

Timing of this report is random within 6-12 hours after AC is lost.

If AC restores before the report goes out, there is no AC loss report.

Press

63 LOW BAT REPORT CODE |

This will be sent when a low battery condition exists in the

system’s standby battery.

Press

64 NORMAL TEST REPORT CODE |

This is sent periodically (* provided no trouble or supervisory

conditions exist; otherwise an Off-Normal Test code - as

programmed in *84 - will be reported) to test that the control and

phone lines are operational (frequency of report is selected in field

*49).

Press

69 GROUP RESTORES FOR TROUBLE and BYPASS

Enter 0 if a report is desired for each zone restoral, as it occurs.

This is the default. Enter 1 if a report is not desired until all

zones have restored.

Note: "1" not applicable to Contact ID reporting.

Press

70 ALARM RESTORE REPORT CODE, 1st DIGIT

This is sent when the zone that caused an alarm is restored to its

non-faulted condition. 2nd digit is automatically sent as the 2nd

digit of the zone alarm report code programmed in field

*56

, if

expanded or 4+2 reporting is selected.

Press

71 TROUBLE RESTORE REPORT CODE |

This is sent when a trouble in a zone is restored. Field *69 applies.

Press

72 BYPASS RESTORE REPORT CODE |

This is sent when a zone that has been bypassed is un-bypassed.

Field *69 applies.

Press

73 AC RESTORE REPORT CODE |

This is sent when AC power has been restored after an AC power

outage.

Press

74 LOW BAT RESTORE REPORT CODE |

This is sent when a system low battery condition is restored to

normal.

Press *79 MAIN/BACKUP DIALER ENABLE |

Enter [1] to enable or [0] to disable each dialer M B

(default = [1][1])

Press *84 MISCELLANEOUS REPORT CODES | | |

FIRE W/T FIRE W/T OFF-

START END NORM

TEST

Press

94 DOWNLOAD PHONE NUMBER

| | | | | | | | | | |

Enter up to 12 digits;

0–9, # +11 for “[*]”, # + 12 for “#”, # + 13 for a pause. Do not fill unused

spaces. End field by entering “

”. To clear entries, press

*94*

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

Comentarios a estos manuales

Sin comentarios

Wheelock MT4-12-LS Guía para resolver problemas Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Detectores de humo Wheelock MT4-12-LS