Wheelock MT4-12-LS Guía para resolver problemas descargar pdf (Pagina 50)

–50–

*31

AUXILIARY RELAY TIMEOUT

This field determines whether the auxiliary relay will shut off after

time allotted, or continue until manually turned off. Enter as follows:

0 = No timeout; 1 = 4 min.; 2 = 8 min.; 3 = 12 min.; 4 = 16 min. (default)

*32

SUPERVISORY ON OPEN/SHORT

If enabled (enter a [1]) this field provides a supervisory condition on

BOTH an open or short circuit. If disabled, [0], an open will cause a

Trouble condition, and a short will cause a Supervisory condition.

(default = 0)

*33 BACKUP

DIALER PULSE/TONE

Enter [1] for Touch Tone or [0] for Pulse Dial (default = 0)

*34 AUXILIARY RELAY FUNCTION

This field determines how the on-board auxiliary relay will be used.

[0] = activate on Trouble/Supervisory, [1] = activate on Alarm, silenced

by pressing the silence/reset button, or code + off (if remote keypad is

used), [2] = Smoke Detector Reset, [3] = Battery Saver Option, [4] =

activate on Alarm, silenced by code + #67 (only if a remote keypad is

used)

Note: When function 1 or 4 is selected, program fields *85 and *86 to

select zones which will trigger aux. relay. When function 1 is selected,

program aux. relay timeout in field *31.

DIALER

PROGRAMMING

(

40–

50)

40 PABX ACCESS CODE (See Box at Left) | | |

Enter up to 4 digits if PABX is needed to access an outside line. If

fewer than 4 digits are needed to be entered, exit by pressing

and

next field number (e.g., 41). To clear entries from field, press

Fields

40,

41,

42:

Enter up to the number of

digits shown. Do not fill

unused spaces.

Enter 0–9,

# + 11 for "

# + 12 for "#’"

# + 13 for a pause

(2.5 secs)

41 PRIMARY PHONE No.

| | | | | | | | | | |

Enter up to 12 digits.

If fewer than 12 digits entered, exit by pressing

and next field

number (e.g., 42). To clear entries from field, press

42 SECONDARY PHONE No.

| | | | | | | | | | |

Enter up to 12 digits.

If fewer than 12 digits entered, exit by pressing

and next field

number (e.g., 43). To clear entries from field, press

*42*

43 SUBSCRIBER ACCOUNT. No | | |

(Enter 3 or 4 digits).

Enter digits 0–9; #+11 = B; # +12 = C; # +13 = D; #+14 = E; or #

+15 = F.

To clear entries from field, press

See blank Programming Form for examples of Account No.

entries.

If only 3-digits are needed exit by pressing * after the 3rd digit

plus the

next field number (e.g., 45).

45 MAIN DIALER PULSE/TONE

Enter [1] for Touch Tone or [0] for Pulse Dial (default = 0)

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

Comentarios a estos manuales

Sin comentarios

Wheelock MT4-12-LS Guía para resolver problemas Pagina 50

Comentarios a estos manuales

Relacionado con productos y manuales para Detectores de humo Wheelock MT4-12-LS